Verified & Correct HPE6-A72 Practice Test Reliable Source Aug 29, 2024 Updated
Free HP HPE6-A72 Exam Files Downloaded Instantly
NEW QUESTION # 51
What is Deep Packet Inspection?
- A. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- B. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
- C. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
- D. a concept that applies to firewalls, when examining packets only up through Layer 4
Answer: B
NEW QUESTION # 52
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 53
What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)
- A. multiple frame copies leading to instability of the MAC address table
- B. broadcast storms
- C. routing loops
- D. costs associated with upgrading from copper to fiber
- E. security issues with a redundant loop indicating to hackers that a back-door exists
Answer: A,E
NEW QUESTION # 54
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION # 55
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 56
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION # 57
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command page
- C. The command more
- D. The command less
Answer: B
NEW QUESTION # 58
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- C. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- D. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
- B. Host-B: assign the default-gateway address 10.1.20.181
- C. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
Answer: D
NEW QUESTION # 60
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- B. VLAN 50 was never added to the vlan-database and therefore is in a down state.
- C. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- D. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
Answer: A
NEW QUESTION # 61
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)
- A. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
- B. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
- C. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.
- D. Rolling back to a prior checkpoint triggers a reboot of the switch.
- E. Stacking switches using VSF or VSX will disable the Checkpoint feature.
Answer: A,B
NEW QUESTION # 62
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- B. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- D. backup secondary sftp://[email protected]/GL.10.04.0003.swi
Answer: C
NEW QUESTION # 63
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 64
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command page
- C. The command more
- D. The command less
Answer: B
NEW QUESTION # 65
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 66
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 01001011
- D. 2
Answer: A
NEW QUESTION # 67
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Lowering the cost of a deployment due to needing less switches overall.
- B. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
- C. Offloading processing from the Core without routing at the Access layer.
- D. Gaining the flexibility to connect the Data-Center to any Access layer switch.
- E. Better scalability in a campus with a large number of buildings.
Answer: C,E
NEW QUESTION # 68
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
- A. Encapsulation
- B. Demodulation
- C. Modulation
- D. Propagation
Answer: A
NEW QUESTION # 69
What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)
- A. WAN/MPLS connectivity
- B. Power over Ethernet
- C. VPN access
- D. Deep packet inspection
- E. Endpoint Access
Answer: B,E
NEW QUESTION # 70
Refer to the exhibit.
What command will display the debug l2mac events?
- A. show debug buffer module L2MAC
- B. show debug all
- C. show module L2MAC
- D. show debug terminal
Answer: A
NEW QUESTION # 71
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 72
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 73
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. RIPng
- B. EIGRP
- C. Local
- D. ISIS
- E. BGP
Answer: C,E
NEW QUESTION # 74
......
Pass HP HPE6-A72 exam Dumps 100 Pass Guarantee With Latest Demo: https://certlibrary.itpassleader.com/HP/HPE6-A72-dumps-pass-exam.html