Cisco 350-401 Practice Verified Answers - Pass Your Exams For Sure! [2024]
Valid Way To Pass CCNP Enterprise's 350-401 Exam
Cisco 350-401 exam is designed for network engineers who are looking to advance their careers in enterprise networking. 350-401 exam is ideal for those who have already gained experience in networking and are looking to validate their skills and knowledge. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is highly valued by employers in the networking industry, as it demonstrates a high level of expertise in enterprise networking. Candidates who pass the exam will be able to take on more complex networking projects and will have a competitive edge in the job market.
NEW QUESTION # 195
Refer to the exhibit.
Which two statements about the EEM applet configuration are true? (Choose two.)
- A. The EEM applet runs before the CLI command is executed
- B. The running configuration is displayed only if the letter Y is entered at the CLI
- C. The EEM applet runs after the CLI command is executed
- D. The EEM applet requires a case-insensitive response
Answer: A,B
Explanation:
Explanation
When you use the sync yes option in the event cli command, the EEM applet runs before the CLI command is executed. The EEM applet should set the _exit_status variable to indicate whether the CLI command should be executed (_exit_status set to one) or not (_exit_status set to zero).
With the sync no option, the EEM applet is executed in background in parallel with the CLI command.
Reference: https://blog.ipspace.net/2011/01/eem-event-cli-command-options-and.html
NEW QUESTION # 196
Refer to the exhibit.
An engineer is designing a guest portal on Cisco ISE using the default configuration. During the testing phase, the engineer receives a warning when displaying the guest portal. Which issue is occurring?
- A. The connection is using an unsupported browser
- B. The server that is providing the portal has a self-signed certificate
- C. The connection is using an unsupported protocol
- D. The server that is providing the portal has an expired certificate
Answer: B
NEW QUESTION # 197
Refer to the exhibit.
An engineer must allow all users In the 10.2.2.0/24 subnet to access the Internet. To conserve address space, the public interface address of 209.165.201.1 must be used for all external communication. Which command set accomplishes these requirements?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 198
A client device roams between access points located on defferent floors in an atrium. The access points joined to the same controller and configuration in local mode. The access points are in different IP addresses, but the client VLAN in the group same. What type of roam occurs?
- A. intra-controller
- B. intra-VLAN
- C. inter-controller
- D. inter-subnet
Answer: D
Explanation:
Mobility, or roaming, is a wireless LAN client's ability to maintain its association seamlessly from one access point to another securely and with as little latency as possible. Three popular types of client roaming are:
Intra-Controller Roaming: Each controller supports same-controller client roaming across access points managed by the same controller. This roaming is transparent to the client as the session is sustained, and the client continues using the same DHCP-assigned or client-assigned IP address.
Inter-Controller Roaming: Multiple-controller deployments support client roaming across access points managed by controllers in the same mobility group and on the same subnet. This roaming is also transparent to the client because the session is sustained and a tunnel between controllers allows the client to continue using the same DHCP- or client-assigned IP address as long as the session remains active.
Inter-Subnet Roaming: Multiple-controller deployments support client roaming across access points managed by controllers in the same mobility group on different subnets. This roaming is transparent to the client because the session is sustained and a tunnel between the controllers allows the client to continue using the same DHCP-assigned or client-assigned IP address as long as the session remains active.
Reference:
4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDA TED_chapter_01100.html In three types of client roaming above, only with Inter-Subnet Roaming the controllers are in different subnets.
NEW QUESTION # 199
Drag and drop the LISP components on the left to the correct description on the right.
Answer:
Explanation:
NEW QUESTION # 200
Refer to the exhibit.
An engineer is designing a guest portal on Cisco ISE using the default configuration. During the testing phase, the engineer receives a warning when displaying the guest portal. Which issue is occurring?
- A. The connection is using an unsupported browser
- B. The server that is providing the portal has a self-signed certificate
- C. The connection is using an unsupported protocol
- D. The server that is providing the portal has an expired certificate
Answer: B
NEW QUESTION # 201
An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the must be the active HSRP router. The peer router has been configured using the default priority value. Which command set is required?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 202
Refer to the exhibit. The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail.
Which type of roaming is supported?
- A. Layer 3 intercontroller
- B. Layer 2 intercontroller
- C. Indirect
- D. Intercontroller
Answer: A
Explanation:
If the clients roam between APs registered to different controllers and the client WLAN on the two controllers is on different subnet, then it is called inter-controller L3 roam.
In this situation as well controllers exchange mobility messages. Client database entry change is completely different that to L2 roam(instead of move, it will copy). In this situation the original controller marks the client entry as "Anchor" where as new controller marks the client entry as
"Foreign".The two controllers now referred to as "Anchor controller" & "Foreign Controller" respectively. Client will keep the original IP address & that is the real advantage.
Note: Inter-Controller (normally layer 2) roaming occurs when a client roam between two APs registered to two different controllers, where each controller has an interface in the client subnet.
NEW QUESTION # 203
Drag and drop the solutions that comprise Cisco Cyber Threat Defense from the left onto the objectives they accomplish on the right.
Answer:
Explanation:
NEW QUESTION # 204
In OSPF, which LSA type is responsible for pointing to the ASBR router?
- A. type 2
- B. type 3
- C. type 1
- D. type 4
Answer: D
NEW QUESTION # 205
Which two namespaces does the LISP network architecture and protocol use? (Choose two.)
- A. EID
- B. TLOC
- C. VTEP
- D. DNS
- E. RLOC
Answer: A,E
Explanation:
Explanation
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address:
+ Endpoint identifiers (EIDs)-assigned to end hosts.
+ Routing locators (RLOCs)-assigned to devices (primarily routers) that make up the global routing system.
Reference: https://www.cisco.com/c/en/us/td/docs/iosxml/
ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-overview.html
NEW QUESTION # 206
Refer to the exhibit.
SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
Explanation:
Explanation
From the "show vlan brief" we learn that Finance belongs to VLAN 110 and all VLANs (from 1 to
1005) are allowed to traverse the trunk (port-channel 1). Therefore we have to remove VLAN 110 from the allowed VLAN list with the "switchport trunk allowed vlan remove " command. The pruning feature cannot do this job as Finance VLAN is active.
NEW QUESTION # 207
Drag and drop the LIPS components on the left to the correct description on the right.
Answer:
Explanation:
* Map server
* EID
* ETR
NEW QUESTION # 208
Refer to the exhibit.
What is the JSON syntax that is formed from the data?
- A. 'Make ": "Gocar1, "Model": "Zoom", "Features": ["Power Windows", "Manual Drive", "Auto AC"]
- B. ("Make":[ "Gocar", "Model": "Zoom"], Features": ["Power Windows", "Manual Drive", "Auto AC"]}
- C. {"Make": Gocar, "Model": Zoom, "Features": Power Windows, Manual Drive, Auto AC}
- D. Make":'Gocar, "Model': "Zoom", "Features": ["Power Windows", "Manual Dnve", "Auto AC"]}
Answer: D
Explanation:
Explanation
JSON syntax structure: + uses curly braces {} to hold objects and square brackets [] to hold arrays + JSON data is written as key/value pairs + A key/value pair consists of a key (must be a string in double quotation marks ""), followed by a colon :, followed by a value. For example: "name":"John" + Each key must be unique + Values must be of type string, number, object, array, boolean or null + Multiple key/value within an object are separated by commas , JSON can use arrays. Arrays are used to store multiple values in a single variable. For example:
{
"name":"John",
"age":30,
"cars":[ "Ford", "BMW", "Fiat"]
}
In the above example, "cars" is an array which contains three values "Ford", "BMW" and "Fiat".
Note: Although our correct answer above does not have curly braces to hold objects but it is still the best choice here.
NEW QUESTION # 209
Which DHCP option provides the CAPWAP APs with the address of the wireless controller(s)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION # 210 
Refer to the exhibit. An engineer must ensure that all traffic entering AS 200 form AS 100 chooses link 2 an enter all BGP neighbor relationship have been formed and that attributes have not been changed on any of the router.
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: C
NEW QUESTION # 211
A network administrator applies the following configuration to an IOS device.
What is the process of password checks when a login attempt is made to the device?
- A. A local database is checked first. If that check fails, a TACACS+server is checked.
- B. A TACACS+server is checked first. If that check fail, a database is checked?
- C. A TACACS+server is checked first. If that check fail, a RADIUS server is checked. If that check fail. a local database is checked.
- D. A local database is checked first. If that fails, a TACACS+server is checked, if that check fails, a RADUIS server is checked.
Answer: A
Explanation:
Explanation
The "aaa authentication login default local group tacacs+" command is broken down as follows:
+ The 'aaa authentication' part is simply saying we want to configure authentication settings.
+ The 'login' is stating that we want to prompt for a username/password when a connection is made to the device.
+ The 'default' means we want to apply for all login connections (such as tty, vty, console and aux). If we use this keyword, we don't need to configure anything else under tty, vty and aux lines. If we don't use this keyword then we have to specify which line(s) we want to apply the authentication feature.
+ The 'local group tacacs+" means all users are authenticated using router's local database (the first method). If the credentials are not found on the local database, then the TACACS+ server is used (the second method).
When you click Deploy, Cisco DNA Center requests the Cisco Identity Services Engine (Cisco ISE) to send notifications about the policy changes to the network devices.
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automationand- management/dna-center/1-3-1-
0/user_guide/b_cisco_dna_center_ug_1_3_1_0/b_cisco_dna_center_ug_1_3_1_0_chapter_01011.ht ml
NEW QUESTION # 212
Drag and drop the QoS mechanisms from the left onto their descriptions on the right
Answer:
Explanation:
Explanation
NEW QUESTION # 213
How does SSO work with HSRP to minimize network disruptions?
- A. It enables data forwarding along known routes following a switchover, white the routing protocol reconverges.
- B. It ensures fast failover in the case of link failure.
- C. It enables HSRP to elect another switch in the group as the active HSRP switch.
- D. It enables HSRP to failover to the standby RP on the same device.
Answer: C
Explanation:
NEW QUESTION # 214
......
Cisco 350-401 Pre-Exam Practice Tests | ITPassLeader: https://certlibrary.itpassleader.com/Cisco/350-401-dumps-pass-exam.html