Tested Material Used To NS0-162 Test Engine Exam Questions in here [Sep-2022]
Penetration testers simulate NS0-162 exam PDF
NEW QUESTION 12
A volume Is set to use Adaptive QoS with the default policy.
In this scenario, which change would affect the QoS throughput ceiling?
- A. Disks are added to the volume's aggregate.
- B. Data is added to the volume.
- C. The volume Is resized.
- D. More clients access the volume.
Answer: A
NEW QUESTION 13
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?
- A. Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.
- B. Enable block-level Invalidation using the volume flexcache origin config modify command.
- C. Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.
- D. Synchronize the origin and cache first with the volume flexcache sync-properties command.
Answer: D
NEW QUESTION 14
Your company is merging with another company. You are asked to setup your AFFA 400 cluster to support two networks that have the same overlapping 192.168.1.0/ 24 subnet.
In this scenario, what must you create, to enable the same subnet with overlapping IPs on the same cluster?
- A. failover group
- B. subnet
- C. IPspace
- D. broadcast domain
Answer: C
NEW QUESTION 15
Exhibit.
You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. ONTAP reports that the volume Is using 100 GB of its containing aggregate.
- B. ONTAP reports the volume as 10% full.
- C. ONTAP reports that the volume Is using 10 GB of Its containing aggregate.
- D. ONTAP reports the volume as 20% full.
Answer: A,D
NEW QUESTION 16
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.)
- A. cluster
- B. admin
- C. data
- D. node
Answer: A,D
NEW QUESTION 17
Click the Exhibit button.
A customer is complaining about performance and wants to improve the latency for vol01.
Referring to the exhibit, what is affecting the performance?
- A. a disk
- B. the cluster
- C. the network
- D. a QoS policy
Answer: D
NEW QUESTION 18
Exhibit.
You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.
Referring to the exhibit, what is the issue?
- A. The igroup contains the wrong protocol.
- B. The igroup contains multiple Initiators.
- C. The initiator is a member of igroups of different OS types.
- D. The igroup does not contain the appropriate initiators.
Answer: B
NEW QUESTION 19
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Enable Kerberos in the export policy.
- B. Add SMB/CIFS to the access protocols.
- C. Add NFSv4 to the access protocols.
- D. Add HOST 3's IP address to the NFS export policy.
Answer: D
NEW QUESTION 20
A volume Is set to use Adaptive QoS with the default policy.
In this scenario, which change would affect the QoS throughput ceiling?
- A. Data is added to the volume.
- B. The volume Is resized.
- C. More clients access the volume.
- D. Disks are added to the volume's aggregate.
Answer: B
NEW QUESTION 21
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)
- A. ONTAP System Manager
- B. Active IQ Unified Manager
- C. Active IQ Config Advisor
- D. ONTAP CLI
Answer: A,C
NEW QUESTION 22
Exhibit.
You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?
- A. 02:a0:98:fl:21:88
- B. 00:a0:98:fl:2e:b3
- C. 02:a0:98:fl:2e:be
- D. 00:a0:98:fl:2e:b2
Answer: B
NEW QUESTION 23
Click the Exhibit button.
You have a new AFF A400 with a switched 10 GbE cluster interconnect.
Referring to the exhibit, which statement is true about utilizing free ports on slot 3 for the data connection?
- A. Slot 3 is used as the acceleration card and the cluster interconnect.
- B. Ports in slot 3 can be used for 40/100 GbE data connections.
- C. The ports in slot 3 cannot be used in any scenario.
- D. Free ports can be used as a 10 GbE connection.
Answer: B
NEW QUESTION 24
Exhibit
Referring to the exhibit, what is the maximum possible IOPS for the VOL_A volume?
- A. 1000 IOPS
- B. 500 IOPS
- C. 2000 IOPS
- D. 100 IOPS
Answer: C
NEW QUESTION 25
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Allow the file type *, rtf In the CIFS Server fpolicy.
- C. Let the user save the file to a writeable location.
- D. Set the user permission for the share to write.
Answer: A
NEW QUESTION 26
What are the two capabilities of an SVM administrator? (Choose two.)
- A. to delegate an aggregate to the SVM
- B. to delete snapshot copies
- C. to create LUNs
- D. to create new users
Answer: B,C
NEW QUESTION 27
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task? (Choose three.)
- A. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
- B. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- C. Enable jumbo frames with an MTU of 9216 for your switches.
- D. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
- E. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
Answer: A,C,D
NEW QUESTION 28
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.
In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
- A. Use ONTAP Select Deploy to Install the nodes on the physical hardware.
- B. Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.
- C. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.
- D. Install the SnapMirror Sync license on the cluster.
Answer: A,C
NEW QUESTION 29
You are asked to investigate possible solutions for increasing the performance of a read-intensive, NFSv3 workload in your FAS environment.
Which two NetApp technologies would satisfy this requirement? (Choose two.)
- A. FabricPool
- B. Flash Pool
- C. FlexCache
- D. FlexVol
Answer: B,C
NEW QUESTION 30
What establishes a quorum in a 4-node cluster?
- A. cluster peer
- B. epsilon
- C. TieBreaker
- D. ONTAP Mediator
Answer: B
NEW QUESTION 31
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?
- A. ai data LIF named after the SVM with the suffix_nfs_lif
- B. an export policy named after the SVM with the suffix_nfs_exp1
- C. a data volume named after the SVM with the suffix_nfs_vol1
- D. a data aggregate named after the SVM with the suffix_nfs_aggr1
Answer: A
NEW QUESTION 32
You have finished deploying a NetApp AFF A400 cluster.
Before you place the array into production, which two tools should be used to validate the deployment? (Choose two.)
- A. Active IQ Web site
- B. OnCommand Workflow Automation
- C. Active IQ Config Advisor
- D. Active IQ Unified Manager
Answer: B,D
NEW QUESTION 33
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Let the user save the file to a writeable location.
- C. Allow the file type *, rtf In the CIFS Server fpolicy.
- D. Set the user permission for the share to write.
Answer: B
NEW QUESTION 34
......
Authentic Best resources for NS0-162 Online Practice Exam: https://certlibrary.itpassleader.com/NetworkAppliance/NS0-162-dumps-pass-exam.html