Guaranteed Success in HPE Technical HPE0-S60 Exam Dumps [Q39-Q63]

Guaranteed Success in HPE Technical HPE0-S60 Exam Dumps

HP HPE0-S60 Daily Practice Exam New 2023 Updated 82 Questions

NEW QUESTION # 39
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?

A. Rack Management Controller for nPar management
B. HPE Superdome Flex Grid licenses enabling connectivity between chassis
C. At least Tour HPE Persistent Memory DIMMs per nPar
D. One base chassis and three expansion chassis with licenses

Answer: D

NEW QUESTION # 40
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?

A. HPE OneView IT HPE Persistent Memory firmware must be updated.
B. RMC CLI to update I/O and HPE Persistent Memory firmware
C. HPE SUM if HPE Persistent Memory firmware must be updated
D. HPE OneView method for I/O firmware update procedure

Answer: B

NEW QUESTION # 41
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?

A. At HPE OneView Interface to verify whether the iLO processor is disabled
B. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
C. At the iLO interface to verify whether the ILO Advanced license is properly applied
D. At HPE OneView Interface to verify whether the server is In the maintenance mode

Answer: C

NEW QUESTION # 42
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)

A. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
B. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
C. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
D. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
F. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy

Answer: A,B

NEW QUESTION # 43
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

A. All logical interconnects configured using this logical interconnect group will be automatically updated
B. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
C. All logical interconnects configured using this logical Interconnect group will report inconsistency
D. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration

Answer: B

NEW QUESTION # 44
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

A. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
B. It is fully managed using HPE OneView including all connections
C. It is equipped with HPE Persistent memory by default
D. It can support a single processor only and up to 4 per chassis

Answer: D

NEW QUESTION # 45
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

A. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

Answer: B

NEW QUESTION # 46
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. interconnect modules are installed in interconnect bays 1 and 4
B. For an uplink set, ports from different modules can be selected
C. An additional license is required to change the enclosure count
D. Both modules are located in different frames for redundancy

Answer: C

NEW QUESTION # 47
Which statement about a new HPE SimpliVity deployment is true?

A. A new HPE SimpliVity node can be a member of multiple dusters
B. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
C. All new HPE SimpliVity models are based on mid CPUs
D. AM new HPE SimpliVity models are software optimized

Answer: B

NEW QUESTION # 48
Put the steps of the HPE infosight flow in the correct order.

Answer:

Explanation:

1 - Observing
2 - Learning
3 - Predicting
4 - Recommending
5 - Acting

NEW QUESTION # 49
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. Both master modules are located in the same HPE S ynergy frame
B. To use interconnect bay set 3, all compute nodes must be half-height
C. For the given downlink speed, the maximum number of frames is reached
D. The master modules are located in the interconnect bays 2 and 5

Answer: A

NEW QUESTION # 50
Click the area within the iLO management interface that will allow you to access workload Advisor.

Answer:

Explanation:

NEW QUESTION # 51
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?

A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
C. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280

Answer: D

NEW QUESTION # 52
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Answer:

Explanation:

NEW QUESTION # 53
Match HPE SimpliVity term with the definition.

Answer:

Explanation:

NEW QUESTION # 54
Which statement about the HPE D3940 storage module is true?

A. Up to five modules can be installed in a single frame with Gen10 servers
B. it is configured through CLl available from HPE Synergy console
C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
D. SATA drives requires redundant 10 adapters to be installed in this module

Answer: B

NEW QUESTION # 55
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?

A. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
B. Before updating to 6,1, customer should increase memory size on the HPE Composer.
C. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
D. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Answer: D

NEW QUESTION # 56
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

Answer:

Explanation:

NEW QUESTION # 57
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?

A. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
C. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
D. Both HPE Synergy Gen10 full-height compute module plugins will require a license

Answer: B

NEW QUESTION # 58
What is one of me benefits of using HPE Composer 2?

A. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
B. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
C. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
D. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system

Answer: D

NEW QUESTION # 59
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A. If the D3940 storage module is property licensed through HPE OneView interface.
B. If there Is a logical interconnect created based on the 12Gb SAS switches.
C. If there is at least one ISCSI network configured that will provide access to the module.
D. If the D3940 module is imported in managed state that allows volume provisioning.

Answer: D

NEW QUESTION # 60
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Answer:

Explanation:

NEW QUESTION # 61
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.