[UPDATED] Symantec 250-587 Certification Exam Questions
Quickly and Easily Pass Symantec Exam with 250-587 real Dumps
NEW QUESTION # 29
You are planning a relayout for a 10GB RAID-5 volume with a RAID-5 log to a stripe-mirror configuration. Dirty-region logging is indicated by the volume's size. How would your plan to address the logs?
- A. Remove the RAID-5 log and create a DRL prior to the relayout operation.
- B. Relayout will remove log plexes from the volume, but the DRL must be created after relayout is complete.
- C. Use the "convertlogs" option of vxassist to cause the relayout job to convert the log plexes.
- D. The RAID-5 log should be removed prior to the relayout and after the relayout completes, the DRL should be created separately.
Answer: D
NEW QUESTION # 30
You are responsible for managing and monitoring the Storage Foundation 5.0 environment in your organization. You notice that VxFS is not performing at an optimal level. You decide to run the fsadm utility. How will the fsadm utility help you resolve this problem?
- A. Remount VxFS and administer it for changes.
- B. Defragment VxFS.
- C. Check and repair VxFS.
- D. Administer VxFS File Change Logs.
Answer: B
NEW QUESTION # 31
While encapsulating a disk, you discover that a volume is removed as a part of the existing configuration. You want to restore the data on the disk as it was before removal of the disk. As the first step, you recreate the volume using the vxdg make command. What should you do next?
- A. Restore the plexes on the volume
- B. Start the hot-relocation process
- C. Restore the data on the volume
- D. Replace the disk
Answer: C
NEW QUESTION # 32
You are working in a production environment. You need to reconfigure the layout of a concatenated volume to a striped volume using the command line without taking the volume offline. You must ensure availability of the volume. What should you do? (Each correct answer presents part of the solution.) (Select two.)
- A. Use the vxdiskadm command to convert the volume from concatenated to striped.
- B. Use the vxassist command to change the volume from concatenated to concatenated-striped and then to a striped.
- C. Use the relayout command to change the volume from concatenated to striped.
- D. Use the vxassist to convert the volume from concatenated to striped.
Answer: C,D
NEW QUESTION # 33
When you are mounting a file system, which mode sets the policy for handling I/O errors on mounted file system?
- A. disable
- B. ioerror
- C. cio
- D. minicache
Answer: B
NEW QUESTION # 34
When deploying Network Monitor, an administrator needs to implement monitoring of port-based protocols. Which protocol is supported by Network Monitor?
- A. IP
- B. UDP
- C. secure tunneling
- D. TCP
Answer: D
NEW QUESTION # 35
You are administering the Storage Foundation 5.0 environment in your organization. Some of the volumes are showing sluggish performance. Tuning the file change using vxtunefs can correct the problem. What are File Change Log tunable parameters for vxtunefs? (Each correct answer presents part of the solution.)(Select two.)
- A. fcl_minalloc
- B. clear
- C. fcl_keeptime
- D. set
- E. fcl_winterval
Answer: C,E
NEW QUESTION # 36
Ten test agents are being deployed that use an uninstall password required to uninstall the DLP Agent. The agents deploy and install correctly. Upon testing to remove the Agent, the uninstall password fails to work. The deployment team used 'Symantec' for the UninstallPasswordKey. Why does the uninstall fail when using the same password?
- A. the PGPsdk.dll file was missing when the key was created
- B. the uninstall agent password needs to match the uninstall password key
- C. the UninstallPwdKeyGenerator must be used to create an UninstallPasswordKey
- D. uninstall passwords are restricted from containing the word 'Symantec'
Answer: C
NEW QUESTION # 37
You have already removed a mirror from volume using vxassist command. After removing a mirror you will be left with only one mirror. However, you need to have at least two mirrors on a volume. What should you do to resolve this situation?
- A. The rule will not allow you to complete this operation.
- B. Change the rule to allow the mirror to be removed
- C. Use the -b option with the vxassist command
- D. Use the -f option with the vxdg command
Answer: D
NEW QUESTION # 38
A Network Monitor is showing under System Overview as 'Running Selected'. The corresponding detection server events indicate that packet capture and filereader are crashing. What is a possible cause for the Network Monitor being in this state?
- A. the minimum required amount of available free space has been used
- B. the Enforce server and detection server are running different versions
- C. the license has expired for this detection server
- D. the detection server is missing the server side certificate
Answer: A
NEW QUESTION # 39
You are accessing the public region of a drive. You get an error message stating that the disk has failed. What could be the possible reason for this message?
- A. VxVM cannot access the private region or the public region of the drive.
- B. VxVM can access the public and the private region of the drive but the plex on the drive is disabled.
- C. VxVM can access the private region but there are uncorrectable I/O failures on the public region of the drive.
- D. VxVM can access the public region of the drive but there are uncorrectable I/O failures on the private region of the drive.
Answer: D
NEW QUESTION # 40
Which action is available for use in Smart Response rules and Automated Response rules?
- A. block email message
- B. modify SMTP message
- C. post log to a syslog server
- D. limit incident data retention
Answer: C
NEW QUESTION # 41
When attempting to log in as administrator to the UI, the administrator receives a login error:
Invalid Username/Password or Disabled Account
The DBA verifies the account is enabled. The information provided for the environment only includes the DLP protect database username and password as well as a username and password called Sys Admin\Admin.
How should the administrator change the built-in 'Administrator' password?
- A. extract the administrator password from the DatabasePassword.properties file
- B. log in to the Enforce UI as the Sys Admin account and go to System > Login Management > DLP Users and reset the administrator password
- C. update the PasswordEnforcement.properties file with a new administrator password
- D. use the AdminPasswordReset utility to update the password
Answer: D
NEW QUESTION # 42
When the system is configured to boot a volume from the root system, you get an error "VxVM vxconfigd ERROR V-5-1-1049 System boot disk does not have a valid rootvol plex". How will you resolve this error?
- A. Stop and restart the vxconfigd daemon on the node indicated.
- B. Reboot the system.
- C. Check other error messages appearing on the console and take the actions suggested in the descriptions of those messages.
- D. Try to boot from one of the named disks using the associated boot command that is listed in the message.
Answer: D
NEW QUESTION # 43
You have just performed maintenance operation on a system where VxVM is installed. When you start the system you realize that some disks have entered the FAILED state. After the inspection of the system, you discover that a cable is unplugged. You reconnect the cable. However, after reconnecting the cable, you need to move these disks out of the FAILED state. How should you resolve this error?
- A. Use the vxmend -g <diskgroup> command with the fix clean plex option
- B. Use the vxvol -g <diskgroup> command with the start volume option
- C. Use the /etc/vx/bin/vxreattach command
- D. Use the /usr/sbin/vxdctl enable command
Answer: C
NEW QUESTION # 44
While deporting a disk group under the VxVM control, the disk group fails. What could be the possible reason for the disk group failure?
- A. An access to the disk group is disabled.
- B. The file system is unmounted.
- C. The disk group contains volumes that are in use.
- D. The database is unmounted.
Answer: C
NEW QUESTION # 45
You have installed the Veritas Enterprise Administrator to manage Storage Foundation 5.0. You want to manage the Veritas Enterprise Administrator from remote system using the Graphical User Interface (GUI). What services must be running on the remote system? (Select two.)
- A. vxservice
- B. vxsvc
- C. vxsvcctrl
- D. vea
- E. vxconfigd
Answer: B,E
NEW QUESTION # 46
Which object is used to initialize a file system for application use?
- A. A volume
- B. A disk group
- C. A partition
- D. A subdisk
Answer: A
NEW QUESTION # 47
You are writing the change documents for a procedure to relay a volume. In which two cases is it necessary to specify a target plex for the "vxassist relayout" operation? (Each correct answer presents part of the solution. Select two.)
- A. When the volume affected has plexes of differing layouts.
- B. When a concatenated layout is being relaid to a mirror-stripe layout.
- C. When a RAID-5 volume is being relaid as a mirrored volume.
- D. When a volume with multiple mirrors is being relaid with only two plexes.
- E. When a mirrored volume is being converted to RAID-5.
Answer: A,E
NEW QUESTION # 48
An I/O error has corrupted multiple plexes of a mirrored volume and has not left any plex CLEAN or ACTIVE. You are required to mark one of the plexes CLEAN and point the system to use that plex as the source for reviving the other plexes. How should you resolve this error?
- A. Use the vxmend -g <diskgroup> command with the fix stale plex option.
- B. Use the vxplex -g <diskgroup> command with the att plex volume option.
- C. Use the vxmend -g <diskgroup> command with the on plex option.
- D. Use the vxmend -g <diskgroup> command with the fix clean plex option.
Answer: D
NEW QUESTION # 49
A DLP administrator needs to configure an Automated Response rule that can execute while endusers are off the corporate network. Which response rule condition will enable the administrator to accomplish this task?
- A. Endpoint Device
- B. Protocol or Endpoint Destination
- C. Sender/User Matches Pattern
- D. Endpoint Location
Answer: D
NEW QUESTION # 50
A DLP administrator is writing one policy to block sensitive data from being copied to removable medi a. The administrator is applying two response rules to the policy: 'Endpoint Prevent: Notify' and 'Endpoint Prevent: Block'.
Why are some copies blocked while others are only notified?
- A. the monitor and ignore filters are defined incorrectly
- B. there are different conditions for the different response actions
- C. the Directory Group Matching (DGM) profile has users in different groups
- D. the DLP administrator needs to fine tune the throttling options
Answer: B
NEW QUESTION # 51
......
Start your 250-587 Exam Questions Preparation: https://certlibrary.itpassleader.com/Symantec/250-587-dumps-pass-exam.html